How to configure your BIOS

At some point, if you have a computer for a long time, you may have to configure or change your BIOS. An acronym for “Basic Input Operating System”, the BIOS is similar to a set of instructions that your computer reads during startup. The BIOS allows you to access the functions to the most basic functions of a computer and configure them, if you know how to access them. When you have accessed them, you can make the necessary changes to configure the system.

At some point, if you have a computer for a long time, you may have to configure or change your BIOS. An acronym for “Basic Input Operating System”, the BIOS is similar to a set of instructions that your computer reads during startup. The BIOS allows you to access the functions to the most basic functions of a computer and configure them, if you know how to access them. When you have accessed them, you can make the necessary changes to configure the system.

Step 1

Turn on the computer from a total shutdown. Look at the screen while it starts. Instructions to press a function key such as F1 or F2 will appear to access the start menu. Each system has different keys to access. Do not worry if you lose it the first time. Record the key, turn off the system and restart it.

Step 2

Press the appropriate function key to access the start menu, repeatedly if necessary, while the computer starts. When you have correctly accessed the start menu, use the arrow keys to navigate through the menu that appears.

Step 3

Select the option that is displayed as “Start” or “Start order” or a different header. Highlight this option and press “Enter”. A list of the hardware selection, a disk drive and probably other functions will appear. The order in which the computer accesses them is called a start order. Normally access the hard disk first and then the disk readers. You can restore this with the default values ​​of the hard disk if it has changed, or the disk if necessary. Scroll down the list that appears with the arrow keys and highlight the unit you want the computer to read first. Press “Enter” Repeat for each hardware device until the order is set.

Step 4

Save the changes by highlighting “Save changes”, press “Enter” and then exit the BIOS. Normal startup continues without messages. If you have problems with the configuration changes you have made, you can restore the system to a previous time to erase those changes.

References